- Body
- Construction: Fabricated, reinforced grade 50 welded steel
- Capacities: 10, 13,
14, 16 and
- 20 cubic yards
- Dumping: Hydraulic power up/
- down 50 degree dump angle
- Tailgate Door: once piece
- reinforced 7 GA
-
Seal:
adjustable neoprene
- Body: safety props - dual
-
- Engine
- Cummins: 6BT5.9 Turbo-charged
Cylinders: 6
Displacement: 359 Cubic Inch (5.9L)
-
Horsepower: 120 HP @
2,200 RPM
- Air Cleaner: heavy-duty, two stage with restrictor indicator
- Protection System: automated engine shut down for low oil/high
temperature
-
- Blower
- Capacity: 16,500 CFM (339.8 cu m/min.),
235 MPH (380 KPH)
Diameter: 33" (838mm)
Blades: 12 - 3/8" (9.5mm) thick steel
Speed: approx. 2,684 RPM
Drive System: cushioned multiple belt through a fluid drive coupler
Housing Construction: Heavy-duty steel
Blower Silencer: acoustically suppressed
- Water System
- Pump: centrifugal with electric or manual clutch
Capacities: 50-120 GPM (189-454 LPM), 50-75 PSI (3.5-5.2 BAR)
Drive: auxiliary engine - v-belt
Pump Controls: cab and exterior
Flow Control: electric solenoid valves and ball valves for infinite variable flow
- Water Tank
- Construction: 1/4" (6.4mm) UV-resistant polyethylene
4" (102mm) air gap fill system
Capacity: 300, 350, and 400 gallons (1113.5, 1324.8, and 1589.7 liters)
Fill System: 15' X 1-1/2" (4572mm X 38mm) ID hydrant hose
Low Water: indicator light in cab
-
- Hydraulic System
- Pump Capacity: 12 GPM (45.42 LPM)
Pump Type: gear down
Filter: high pressure 10 micron
Control Valves: 12 VDC solenoid operated
-
- Electrical System
- Battery: 12 volt, 1000 CCA
Alternator: 65 AMP
- Other Standard Equipment
- Wash down gun with 15' x 3/4" hose
Removable filter screens
Front air chamber with two (2) side cleanout ports
DOT lights and reflectors
-
- Electrical System
- Battery: 12 volt, 1000 CCA
Alternator: 65 AMP
- Other Standard Equipment
- Wash down gun with 15' x 3/4" hose
Removable filter screens
Front air chamber with two (2) side cleanout ports
DOT lights and reflectors
|
- Optional Equipment
- Catch Basin Hose Assembly: rear-mounted, 12" ID by 10' (305mm X 3m)
Front Mounted Catch Basin Hose Assembly: 12" ID (305mm) 13 &16 only
Elecric Body Vibrator
Body Fenders
Body Load Indicator
Various lenghts of 12" diameter intake tubes
Strobe lights
Back-up Alarm
Arrow Stick Light
- General Specifications
- (Common to all Sweeper Models)
-
- Gutter Brooms
- Diameter: 30" or 36" (762mm or 914mm)
Drive: hydraulic
Speed: variable
Mounting: free floating automatic kickback - single or dual
Construction: flat-tempered, double steel wire, 26" long (660mm)
Dust Control: four (4) adjustable flow spray nozzles
- Underbody Transfer Broom
- Diameter: 16" (406mm) X 40" (1016mm) length
Speed: variable
Dust Control: four (4) adjustable flow spray nozzles
Construction: one piece disposable polypropylene
- Vacuum Pick-up Nozzle
- Construction: 1/4" (6.4mm) steel- supported by a parallelogram linkage
Size: 42" (1067mm) or 48" (1,219mm) wide- up to 450 square inch (2,903 sq cm) area of coverage
Adjustable: nozzle adjustable to sweeping conditions
Body Connection: 12" 9305mm) ID flexible rubber suction hose
Design: equipped with replaceable steel wear liners
Dust Control: nine (9) internal water spray orifaces located in the head plus six (6) injection orifaces located in the scrubber manifold
- Sweeping Path
- Nozzle and Brooms: 8.0' to 8.5' (96" or 102") 2438mm to 2591mm
Nozzles and Gutter Brooms only: 74" (1880mm)
Nozzle only: 42" (1067mm) or 48" (1,219mm)
- Sweeper Controls
- Cab: adjustable control console
Functions: nozzle position, broom speed, water flow, engine speed, lights, low water
- Options
- Catch Basi Assimbly: rear-mounted 12" (305mm) diameter, hydraulic
Engine Throttle: rear-mounted pendant
Body Drain Valve Assembly: 6" (152mm)
Lights: for brooms, nozzles and safety beacons
Auto reverse nozzle and broom pickup
- Other Options Available
- Please email for more options
|
